AX0-100 Free Practice Test

IEEE 802.1 X is a security feature that

1. A. Applies end-to-end encryption between the camera and the server over the internet, ensuring that other users on the network cannot eavesdrop on the surveillance video.
2. B. Only gives approved devices access to the network, making it impossible to disconnect a camera and connect other equipment to eavesdrop on the network.
3. C. Disables port forwarding, making it impossible for users outside the local network to get access to the surveillance video.
4. D. Uses a cryptographic signature to ensure the integrity of the address tables used by the router, making it impossible for malicious users to redirect the surveillance video to unauthorized recipients.

Correct Answer: B

Adding network surveillance cameras to an existing Ethernet network

1. A. Is not recommended, since bandwidth demands from the surveillance video would likely congest the network.
2. B. Will benefit from using VLANs, to keep the surveillance video separate from other network traffic, reducing the risk for network congestion.
3. C. Will cause unacceptable video latency, due to the amount of UDP traffic taking precedence on the network.
4. D. Will benefit from establishing VPN connections to the cameras, reducing the risk of malicious users eavesdropping on the video.

Correct Answer: B

For which purposes would a thermal network camera be a viable alternative to a standard network camera? (Choose three)

1. A. Identification of a person
2. B. Detection at daylight
3. C. Detection at night
4. D. Detection in smoke and light fog conditions
5. E. License Plate Recognition

Correct Answer: BCD

To make use of IEEE 802.1 X when connecting a camera to the network, you need (Choose two)

1. A. An Ethernet switch with support for IEEE 802.1X.
2. B. A router.
3. C. A RADIUS server.
4. D. Category 6 or Category 5e Ethernet cabling.
5. E. A server with a Gigabit Ethernet network card.

Correct Answer: AC

After an installer sets up a motion detection window they then zoom out the camera. How will this affect the camera's ability to detect motion if no settings are changed?

1. A. More pixels are needed to change to trigger motion detection
2. B. Less pixels are needed to change to trigger motion detection
3. C. More movement needed to change to trigger motion detection
4. D. Less movement needed to change to trigger motion detection

Correct Answer: C