HPE6-A47 Free Practice Test

A plan includes these security settings for the employee WLAN:
* WPA2-Enterprise with AES encryption
* 802.1X with PEAP-MSCHAPv2
However, the customer wants to use certificates to authenticate user devices. Which change brings the plan in alignment with the customer requirements?

1. A. Use EAP-TLS instead of PEAP-MSCHAPv2
2. B. The TKIP encryption instead of AES.
3. C. Add WPA2-PSK as an alternative to WPA2-Enterprise.
4. D. Add Tunneled TLS (TTLS) as an alternative to PEAP-MSCHAPv2.

Correct Answer: D

An architect proposes four 7210 Mobility Controllers (MCs) to support about 1,500 client APs. The customer environment will have a maximum of about 20,000 wireless clients. The customer wants hardware MMs with an active and standby deployment. What is the minimum solution that meets the customer requirements?

1. A. two MM-HW-10K appliances
2. B. two MM-HW-5K appliances
3. C. four MM HW-5K appliances
4. D. four MM HW-10K appliances

Correct Answer: B

An architect needs to plan 802.11ac wireless deployment for an office environment with a mix of closed offices and cubicles. The coverage area is approximately 4,645 square meters (approximately 50,000 square feet) and has 350 users. The employees use the wireless network for typical office applications, such as email, Web, printing, and accessing shared files and datacenter services.
The architect plans to do a predictive site survey and use VisualRF to plan the coverage. What is a general estimate for the AP count that the architect should have in mind?

1. A. 5-10
2. B. 10-15
3. C. 20-25
4. D. 40-45

Correct Answer: D

An architect learns that a customer site is 14,307 square meters (154,000 square feet) and supports 900 employees using WiFi 5 Ghz radio. What additional information should the architect collect to create the RF plan?

1. A. number of devices used by each user
2. B. the OS used on wireless devices
3. C. whether BLE wayfinding is required
4. D. software version on Mobility Controllers (MCs)

Correct Answer: A

An architect needs to plan the bandwidth for two Aruba 7240 Mobility Controllers (MCs) which will connect to the network core. The customer indicates that four 10 GbE links between the network core and the data center will be adequate. The customer expects almost all traffic in the network will be wireless. The customer expects up to 25 Gbps upstream traffic from wireless clients and up to 35 Gbps downstream to wireless clients. The customer requires the MCs to be able to continue to forward traffic if up to one link fails, but lower performance during the failover situation is permissible.
What are the minimal links to meet these requirements?

1. A. two 10 GbE links on each of the MC
2. B. two 40 GbE links in each of the MCs
3. C. three 10 GbE links on each of the MCs
4. D. four 10 GbE links on each of the MCs.

Correct Answer: B